Soldering station with digital LED display, temperature control and stabilization and sleep function. The set includes a multifunctional housing with an end support, a place for a tin roll and a brass tip cleaner. The station supports a soldering iron with a built-in ceramic heater for the very popular 900M series interchangeable tips. Relatively high power combined with required soldering features and a hard flask with silicone, high temperature resistant power cord
Power: 60W
Temperature range: 90 - 480 ° C
Temperature accuracy: + - 2 ° C
Temperature stabilization
Device sleep mode: 10 min
ON/OFF button on the side
A digital display with a blue LED backlight informs us about:
The actual nozzle temperature is set
The soldering iron is placed on the stainless steel handle.
Heater operating voltage: ~ 230V
Nozzle type: 900M
Ceramic heater
Outer diameter of the heater: 3.85 mm
Cable length: 100 cm
Weight: about 50 g
The YT-82460 soldering station is manufactured using ESD-safe technology, which guarantees that no excessive electrostatic charge will accumulate on the housing. As a result, we limit the risk of damaging sensitive SMD circuits, for example. It heats up to an operating temperature of 350 ° C in about 30 seconds.
The temperature stabilization function allows the set nozzle temperature to be maintained under various heat demand conditions for proper solder connection. Depending on the size of the soldered element and the soldering field, the nozzle emits more or less heat, and the appliance continuously reads and compares the actual value of the nozzle with a built-in nozzle temperature sensor, then increases or decreases energy consumption as required. to maintain the set value. temperatures. The best effect of this function is achieved by choosing a nozzle whose inner diameter is as close as possible to the diameter of the heater. We recommend nozzles with an inside diameter ranging from 4.0 to 4.5 mm
The device's hibernation feature allows the station to enter standby mode, which automatically reduces the operating temperature to 200 ° C. This avoids unnecessary heating of the nozzle, which significantly extends its service life. The function activation time is set to 10 minutes at the factory on the YT-82460